Morleys Ltd

Morleys Ltd JM logo
 
Telephone: 01772 626700    Fax: 01772 627372    Email: sales@morleysltd.co.uk
 

Beech

Oak

Maple

Mahogany

Cherry

Metal finishes

Wood finishes click to enlargeclick to enlarge

Note: (14mm & 19mm Ramp Clip wood effect colours not available)

clip fit system
patent
  • This system is quick and easy to fit.

  • The fitter retains full view throughout the fitting, allowing the placing and cutting of the flooring to be carried out precisely. This is particularly helpful for the fitting of laminate and wood flooring.

  • Once the fitting of the flooring is complete, the fitter places the relevant profile into the uPVC track and pushes down.

  • Once in place, the top is firm and secure. However, the system allows for the tops to be removed and replaced without damaging the flooring, should a change of decor be required at a later date.

  • There are no visible fitting screws, thus providing a neat and attractive finish.

  • The system is available at sensible prices - affordable for all installations!!

specifications

  • Profiles conform fully to BS1474, 6063TF - providing a durable and hard wearing surface.

  • Available in matt gold, bright gold, bronze and mill finish aluminium finishes. Matt gold, bright gold and mill finishes are available from stock, bronze will be made to order. The profiles will compliment any choice of decor. The anodised finishes conform fully to BS1615 1987.

  • Stock lengths: 8mm profiles available in 2700mm & 900mm lengths. 14mm & 19mm profiles available in 2700mm lengths only.

  • Packing: 8mm profiles available in tubes of 12 x 2700mm and boxes of 36 x 900mm. 14mm & 19mm profiles available in tubes of 6 x 2700mm only. Each tube/carton comes with equivalent metreage of single or double, predrilled uPVC track, together with fixing screws
 

Beech
click to enlargeclick to enlarge

cover clip
cover clip

An ideal joining cover that provides an attractive and safe transition between two surfaces of the same level. It is particularly attractive when used as a threshold strip.

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: CC8-
Height levels: 8mm - 12mm
Uses: Laminate to laminatem laminate to ceramic, laminate to carpet, carpet to carpet.

Code: CC14
Height Levels: 14mm - 19mm
Uses: Wood to wood.

 

Beech
click to enlargeclick to enlarge

ramp clip
ramp clip
A redusing strip to accomodate a safe transition from higher to lower level flooring. Used most commonly as a threshold strip, it's also used as an attractive border for aisle ways in open plan situations.

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: RC8
Height Levels: 8mm - 12mm higher; 2mm - 6mm lower.
Uses: Laminate to carpet, laminate to vinyl, carpet to vinyl.

Code: RC14
Height Levels: 14mm-18mm higher; 2mm-6mm lower.
Uses: Wood to carpet, wood to vinyl.

Code: RC19
Height Levels: 19mm-23mm higher; 2mm-6mm lower.
Uses: Wood to carpet, wood to vinyl.

 

Beech
click to enlargeclick to enlarge

square clip
square clip
Suitable for perimeter edging, particularly with lamintae flooring. It removes the problem of having to remover and re-fit the skirting board once the floor has been laid. This profile is very popular when edging around a fire place.

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: SC8
Height Levels: 8mm-12mm
Uses: Perimter edging for laminate.

Code: SC14
Height Levels: 14mm-19mm
Uses: Perimter edging for wood.

  NLTGw3c xhtml 1.0 Bobby 508 Approved ICRA - Internet Content Ratings Association Unit 2, Higher Walton Mill, Higher Walton, Preston PR5 4DJ